Vous n'êtes pas identifié(e).
Pages : 1
Posted by IceCat On juillet 4, 2010
Ne vous êtes-vous jamais demandé combien d’heures votre disque dur avait dans les pattes ?
On peut le savoir sur Debian avec S.M.A.R.T. du paquet smartmontools.
smartctl -a /dev/sda
prérequis: paquet smartmontools installé
sudo apt install smartmontools
Les paquets supplémentaires suivants vont être installés :
s-nail
Paquets suggérés :
exim4 | mail-transport-agent gsmartcontrol smart-notifier
Les NOUVEAUX paquets suivants seront installés :
s-nail smartmontools
commande précédée de sudo
R50 IZI
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M5
Device Model: SAMSUNG HM160HC
Serial Number: S12TJDRB203552
LU WWN Device Id: 5 0f0000 022203552
Firmware Version: LQ100-10
User Capacity: 160 041 885 696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 951
Il ne sert pas pas souvent celui là...
ACER
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD5000BEVT-22A0RT0
Serial Number: WD-WX21A80P8962
LU WWN Device Id: 5 0014ee 6005fb0c5
Firmware Version: 01.01A01
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2052
un peu plus déjà, c'est une occase...
EDIT disque ACER dans T61 05-12-2021
depuis 09-2014 soit 7 ans 3 mois, il a pris 10330 - 2052 soit 8 278 heures en 2645 jours soit 3,13 H /jour !! Petit joueur...
9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 10330
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.3
Device Model: ST9160821A
Serial Number: 5MACF06P
Firmware Version: 3.ALE
User Capacity: 160 041 885 696 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 11010
Mon pc principal R51...je pensais pas qu'il avait autant...
Samsung donné à un ami....que je dépanne...pas top cette bécane avec 4 Go de ram et un dual core...
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M6
Device Model: SAMSUNG HM320JI
Serial Number: S1HQJD0S136163
LU WWN Device Id: 5 0f0000 003136163
Firmware Version: 2SS00_01
User Capacity: 320 072 933 376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Wed Aug 6 14:46:47 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 7958
Disque clone du disque du R51 principal (en test dans un T61) SATA
=== START OF INFORMATION SECTION ===
Device Model: ST95005620AS
Serial Number: 5YX18DBK
Firmware Version: SD26
User Capacity: 500 107 862 016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Aug 6 14:53:15 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Y sert vraiment peu
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 664
Dernière modification par wanica (06-08-2014 14:56:21)
Hors ligne
Les pc icaunux T61
celui avec debian et emma et lubuntu
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K250
Device Model: HITACHI HTS542512K9SA00
Serial Number: 080523BB6202WBF1D2EG
LU WWN Device Id: 5 000cca 536eae839
Firmware Version: BB2ZC3HP
User Capacity: 120 034 123 776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
Plus tout jeune, mais ça va encore...
9 Power_On_Hours 0x0012 087 087 000 Old_age Always - 6030
Unautre: celui sur lesquel icecat avait installé debian
=== START OF INFORMATION SECTION ===
Device Model: HITACHI HTS541612J9SA00 3H
Serial Number: SB2541H6JU87BS
LU WWN Device Id: 5 000cca 543e7ab35
Firmware Version: SB3IC7UP
User Capacity: 120 034 123 776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
plus copieux cui là
9 Power_On_Hours 0x0012 077 077 000 Old_age Always - 10218
Dernière modification par wanica (06-08-2014 15:09:39)
Hors ligne
Le PC de Michel tour pentium 4
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.8
Device Model: ST3200826AS
Serial Number: 5ND2441W
Firmware Version: 3.03
User Capacity: 200 049 647 616 bytes [200 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Thu Aug 7 15:15:54 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Un disque pas vieux pour un pc de presque 10 ans
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 793
Hors ligne
Hors ligne
R50 IZI
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M5
Device Model: SAMSUNG HM160HC
Serial Number: S12TJDRB203552
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 951
Il ne serVAIt pas pas souvent celui là...
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 2452
1500 heures depuis le 6 août 14 soit 11 mois soit 4,54 H / jour disons 4 h 30 quand même !
Comme quoi il vaut mieux avoir plusieurs pc !!
Et cui là ? Le ACER
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD5000BEVT-22A0RT0
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2052
un peu plus déjà, c'est une occase...mais presque 1000 heures en un an....
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3013
Evidemment plusieurs PC sont souvent allumés en même temps, ce qui recèle quelques avantages...
Hors ligne
EDIT
Nota: pour connaître de suite les valeurs qui ont dépassé les seuils:
sudo smartctl -H /dev/sda
Nota 2: Tout n' est pas à prendre à la lettre:
cf liens suivants:
https://serverfault.com/questions/47947 … -4tb-drive
https://forum.pcastuces.com/inquietude_ … s13613.htm
====================================================================================================
Déterminer si la fonction parcage (et donc usure du DD) est trop agressive.
Pour établir le diagnostic, il est préférable de calculer le rapport entre le nombre de Load_Cycle_Count et la durée de fonctionnement du disque dur : Power_On_Hours (ou Power_On_Minutes ou Power_On_Seconds selon les disques durs). Un rapport LCC/heure inférieur à 30 indique un fonctionnement assez correct de la fonction de parcage. S'il est supérieur, voire très supérieur, il y a une anomalie à corriger.
Exemple
Nombre d' heures de fonctionnement du DD
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5759
Nombre d'extinctions du pc, ou de redémarrages !
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4413
Nombre de parcages
193 Load_Cycle_Count 0x0032 092 092 000 Old_age Always - 324864
Parcages 324 864
Arrêts 4413
Load_Cycle_Count / Power_Cycle_Count ===> 324 864 / 4413 = 73,6
Le nombre de parcages à l'heure est de 324864/5759 = 56
Selon la doc ubuntu, si Load_Cycle_Count est supérieur à 10 millions, c'est probablement que l'information extraite par smartctl depuis le disque dur est inexacte. Dans ce cas, on peut se référer aux 3 colonnes (092, 092, 000) pour essayer de déterminer l'espérance de vie du disque.
Les données "(092, 09)" signifieraient qu'il reste au disque dur 92% de sa durée de vie.
Un DD ça peut faire combien ? On n' en sait rien ! Donc des sauvegardes, des sauvegardes !!
https://www.reddit.com/r/techsupport/co … urs_on_it/
I don't care how old the drives are. New drives can fail, or old drives can work far longer than you'd expect. As long as the data is appropriately backed up (frequently and tested) and you're aware of how much data will be lost if you have a drive failure and the backup frequency takes that into account, you're fine.
Hors ligne
EDIT 2018 Hdparm
Changer les paramètres de gestion de l'alimentation du disque dur, afin d'éviter le parcage intempestif de la tête de lecture.
Quelle valeur utilise mon DD ?
sudo hdparm -B /dev/sda
/dev/sda:
APM_level = 96
Une valeur plus élevée fera qu' il se parquera moins.
La valeur 254 désactive le parcage.
sudo hdparm -B 200 /dev/sda
/dev/sda:
setting Advanced Power Management level to 0xc8 (200)
APM_level = 200
Hors ligne
Hors ligne
La suite, un disque qui semble mal en point...
sudo smartctl -a /dev/sdb
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA (AF)
Device Model: WDC WD6400BPVT-22HXZT3
Serial Number: WD-WX71A9160164
LU WWN Device Id: 5 0014ee 601b5288c
Firmware Version: 01.01A01
User Capacity: 640 135 028 736 bytes [640 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sun Oct 18 11:03:36 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
**SMART overall-health self-assessment test result: FAILED!**
Drive failure expected in **less than 24 hours**. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (15480) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 152) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 2394
3 Spin_Up_Time 0x0027 178 174 021 Pre-fail Always - 2066
4 Start_Stop_Count 0x0032 093 093 000 Old_age Always - 7449
5 Reallocated_Sector_Ct 0x0033 133 133 140 Pre-fail Always FAILING_NOW 561
7 Seek_Error_Rate 0x002e 132 132 000 Old_age Always - 8032
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3282
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1920
191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 219
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 53
193 Load_Cycle_Count 0x0032 029 029 000 Old_age Always - 513212
194 Temperature_Celsius 0x0022 120 105 000 Old_age Always - 27
196 Reallocated_Event_Count 0x0032 183 001 000 Old_age Always - 17
197 Current_Pending_Sector 0x0032 199 199 000 Old_age Always - 106
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 17910 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 17910 occurred at disk power-on lifetime: 3282 hours (136 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 61 02 00 00 00 a0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ef 10 02 00 00 00 a0 08 17:56:19.942 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 08 17:56:19.938 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 17:56:19.938 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 08 17:56:19.938 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 08 17:56:19.934 IDENTIFY DEVICE
Error 17909 occurred at disk power-on lifetime: 3282 hours (136 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 61 46 00 00 00 a0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ef 03 46 00 00 00 a0 08 17:56:19.938 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 08 17:56:19.938 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 08 17:56:19.934 IDENTIFY DEVICE
ef 10 02 00 00 00 a0 08 17:56:19.933 SET FEATURES [Enable SATA feature]
Error 17908 occurred at disk power-on lifetime: 3282 hours (136 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 61 02 00 00 00 a0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ef 10 02 00 00 00 a0 08 17:56:19.938 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 08 17:56:19.934 IDENTIFY DEVICE
ef 10 02 00 00 00 a0 08 17:56:19.933 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 08 17:56:19.929 IDENTIFY DEVICE
Error 17907 occurred at disk power-on lifetime: 3282 hours (136 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 61 02 00 00 00 a0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ef 10 02 00 00 00 a0 08 17:56:19.933 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 08 17:56:19.929 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 17:56:19.928 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 08 17:56:19.928 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 08 17:56:19.924 IDENTIFY DEVICE
Error 17906 occurred at disk power-on lifetime: 3282 hours (136 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 61 46 00 00 00 a0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ef 03 46 00 00 00 a0 08 17:56:19.928 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 08 17:56:19.928 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 08 17:56:19.924 IDENTIFY DEVICE
ef 10 02 00 00 00 a0 08 17:56:19.923 SET FEATURES [Enable SATA feature]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 3263 35676071
# 2 Extended offline Completed: read failure 90% 3263 35676068
# 3 Extended offline Aborted by host 90% 3263 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Error 17906, 7, 8, 9 et Error 17910
5 Reallocated_Sector_Ct 0x0033 133 133 140 Pre-fail Always FAILING_NOW 561
04 61 02 00 00 00 a0 Device Fault; Error: ABRT
Hors ligne
sudo hdparm -B /dev/sdb
/dev/sdb:
APM_level = 96
Nombre de parcages trop fréquents 157 par heure soit environ 3 /min.
Test rapide refusé.
revérifier avec l' utilitaire WD de formatage....
Hors ligne
Test disque occasion reçu récemment.
Un Hitachi 500 Go sata 2.5
Connecté USB par kit spécial tous DD Externes, tous formats
smartctl -a /dev/sdb
=== START OF INFORMATION SECTION ===
Model Family: Hitachi/HGST Travelstar 5K750
Device Model: Hitachi HTS547550A9E384
Serial Number: J2150050D7BTZD
LU WWN Device Id: 5 000cca 63bd1726b
Firmware Version: JE3OA60A
SATA Version is: SATA 2.6, 3.0 Gb/s
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
SMART Disabled. Use option -s with argument 'on' to enable it. (override with '-T permissive' option)
Disabled ah ?!
sudo smartctl --smart=on --offlineauto=on --saveauto=on /dev/sdb
réponse:
START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Attribute Autosave Enabled.
SMART Automatic Offline Testing Enabled every four hours.
Relaçons la commande habituelle:
sudo smartctl -a /dev/sdb
Réponse:
SMART support is: Enabled
Read SMART Thresholds failed: scsi error medium or hardware error (serious)
et
=== START OF READ SMART DATA SECTION ===
SMART Status command failed: Connexion terminée par expiration du délai d'attente
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.
Liste pourtant des infos étranges ceci dit ! Ou alors le DD est NEUF
4 Start_Stop_Count 0x0012 100 100 --- Old_age Always - 81
9 Power_On_Hours 0x0012 100 100 --- Old_age Always - 25
12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 59
192 Power-Off_Retract_Count 0x0032 100 100 --- Old_age Always - 21
193 Load_Cycle_Count 0x0012 100 100 --- Old_age Always - 771
25 heures de fonctionnement ?!
Le placer à présent sur rack Ultrabay Sata IBM et vérifier la cohérence des data.
Nota, la plupart des sites web indiquent des âneries très vieilles (allez dans le bios pour activer smart)...INUTILE sur pc et disques "récents".
Hors ligne
Sur dock ultrabay sata, les infos disques indiquent:
500 Go + espace disque 2,6 Mo ?!! en fin departoche....Quesako ?
Sur kit externe, une seule partition était vue !
Format NTFS exFAT HPFS
sudo smartctl -a /dev/sdb
Les data sont identiques, modulo une heure de fct en plus= OK
sudo hdparm -B /dev/sdb
donne
/dev/sdb:
APM_level = 254
A priori le parcage des têtes est désactivé. Cependant, on peut le déduire ar le rapport de Load cycle count sur celui de power cycle count, soit Ligne 193/ Ligne 12 donne le nombre de parcages par H
771/59 font 13 par h = correct !
Voyons ce qu'en dit testdisk
Est ce qu'il trouve des data ?
Rien de particulier= une seule partition en NTFS ==> écrire la table des partitions (msdos)
Hors ligne
Smarmontools va aussi pour les ssd
$ sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.4.0-91-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: CT500MX500SSD1
Serial Number: 2141E5D9CD61
LU WWN Device Id: 5 00a075 1e5d9cd61
Firmware Version: M3CR043
User Capacity: 500107862016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA >3.2 (0x1ff), 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Fri Dec 31 16:04:36 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completedw without error or no self-test has ever been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 10
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 7
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
173 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 56
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 076 063 000 Old_age Always - 24 (Min/Max 0/37)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
202 Unknown_SSD_Attribute 0x0030 100 100 001 Old_age Offline - 0
206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 81060171
247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 707482
248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 107534
Disque neuf en test...
Hors ligne
Disque x200 en 160 Go
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MJA BH Device Model: FUJITSU MJA2160BH G2 Serial Number: K95BTA22B1A5
User Capacity: 160041885696 bytes [160 GB] Rotation Rate: 5400 rpm Form Factor: 2.5 inches
SMART support is: Available - device has SMART capability. SMART support is: Enabled
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 4665
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 634
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 18786
4665 heures !! L' appli disk nous donne six mois et onze jours soit environ 191 jrs à 24 h = 2400+ 2160+24 = 4584 légère incohérence...
ligne 193/ ligne 12 ===>18786/634 = 29,63
parcage = 18786/4665 = 4 parcages à l'heure !! On est largement bon...
Il a eu que 634 redémarrages en 4665 h à raison de journées de 8 heures, le pc/DD a fonctionné durant un an et demi à deux ans (repos, we)= 4665/8 = 583 jours, donc à peu près un démarrage par jour... ou en semaines de 39 h = 4665/39 = 119 semaines, soit plus de deux ans (sans vacance)
Hors ligne
Pages : 1